Heating power [kW]: 0/1.8/5.4/9.0
Ventilator mode: Yes
Built-in room thermostat: Yes
Power supply [V] / Frequency [Hz]: 3x230V/50Hz
Rated current [A]: 28
Fan diameter [mm]: 300
Air flow [m3/h]: 700/1000
Product size (LxWxH) [mm]: 655x464x567
Net weight [kg]: 15.6 | IP: 54
Dania LB 9kW IP54 3x230V/50Hz electric space heater has been designed for Norway market for use in places where high resistance to dust is required, and its operation will take place in an atmosphere causing accelerated corrosion.
Heater case is made of stainless steel. Control system components and components under voltage are located in separate housing located outside the air flow path. This prevents small particles from being sucked / blown in and settled on live components. This solution significantly extends the trouble-free operation of the heater in dusty conditions.
Dania LB 9kW can be used as a portable device or after buying a dedicated wall mount as a stationary heater.
It is intended for heating rooms:
production rooms li>
rest and refreshment rooms li>
rooms in the service sector and agriculture sector
rooms under construction, renovation and finishing works
Recommended as a supporting device in the drying process with the use of dehumidifiers and fans.
3x230V / 50Hz three phase power supply (Norway market)
5-pin connection socket
100% efficiency - all energy consumed heats the room
does not consume oxygen during operation, does not emit odors, does not emit exhaust gases
heating power control: 1/5 power (1.8kW), 3/5 power (5.4kW) and full power (9kW)
fan mode- air blowing without heating
2 fan speeds
built-in room thermostat
thermal protection (thermal fuse)
automatic thermal fuse reset
heating elements made of stainless steel
durable construction made of stainless steel
designed for professional use
high quality workmanship, in line with EU requirements